Cheap PriceList for Bell Jar Annealing Furnace Oxygen Probe - Nernst H series heated oxygen probe – Litong

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We always get the job done being a tangible workforce making sure that we can easily give you the very best quality as well as finest selling price for O2/Co Oxygen Content And Combustible Gas Two-Component Analyzer, Boiler Flue Gas Analysis, Petroleum Refining Explosion-Proof Zirconia Probe, Our purpose is always to build Win-win scenario with our customers. We feel we are going to be your greatest choice. "Reputation To start with, Buyers Foremost. "Waiting for your inquiry.
Cheap PriceList for Bell Jar Annealing Furnace Oxygen Probe - Nernst H series heated oxygen probe – Litong Detail:

Application range

The Nernst H series heated oxygen probe is used to directly measure the oxygen content in the flue gas discharged from boilers, furnaces, kilns, dryers, and various combustion processes or after combustion.

The probe can be directly connected to Nernst’s oxygen analyzer. It can also be connected to oxygen analyzers and oxygen sensors produced by other companies. The oxygen probe has a wide range of oxygen measurement, from the 10-30 to 100% oxygen content, it can be used to indirectly measure high-temperature water vapor, carbon potential, and high-temperature dew point.

The working temperature that the probe can withstand can range from ambient temperature to 900°C high temperature.

Specifications and technical parameters

Model: H series heated oxygen probe

Shell material: 316L stainless steel

Application flue gas temperature: below 900°C

Temperature control: The probe has its own heater to keep the temperature of the zirconium head constant.

Thermocouple: Type K

Heating time: about 15 to 30 minutes to reach the rated temperature of 700°C. (Related to flue gas temperature)

Installation and connection: The probe comes with 1.5″BSP or NPT thread. The user can process the matching flange of the furnace wall according to the attached drawing in the instruction manual.

 Reference gas: The gas pump in the analyzer supplies about 50 ml/min. Use the gas for the instrument and supply the gas through the pressure reducing valve and float flow meter provided by the user. The manufacturer provides the PVC connecting pipe from the float flowmeter to the sensor and the connector at the sensor end with the transmitter.

Gas connection pipe: PVC pipe with an outer diameter of 1/4″ (6.4mm) and an inner diameter of 4 (mm).

Check gas connection: The sensor has an air inlet that can pass check gas. When it is not checked, it is closed by a bulkhead. When calibrating the air, the flow rate is controlled at about 1000 ml per minute. The manufacturer provides 1/8″NPT threaded pipe joints that can be connected to PVC pipes.

Zirconium battery life: 4-6 years of continuous operation. It depends on the flue gas composition and temperature. Intermittent operation will affect the service life, and the heater should be kept running continuously.

Response time: less than 4 seconds

 Filter: Stainless steel movable type. Filter outer diameter ¢42 (mm)

 Probe protection tube outer diameter: ¢32 (mm)

Probe junction box temperature: <130°C

Probe electrical connection: direct plug socket type or aviation plug socket.

 Weight: 0.6Kg plus 0.33Kg/100mm length.

Calibration: After the initial installation of the system is stable, it needs to be checked once.

Length:

Standard model Explosion-proof model Length
H0050 H0050(EX) 50mm
H0150 H0150(EX) 150mm
H0190 H0190(EX) 190mm
H0250 H0250(EX) 250mm
H0350 H0350(EX) 350mm
H0500 H0500(EX) 500mm
H0750 H0750(EX) 750mm
H1000 H1000(EX) 1000mm
H1500 H1500(EX) 1500mm

Product detail pictures:

Cheap PriceList for Bell Jar Annealing Furnace Oxygen Probe - Nernst H series heated oxygen probe – Litong detail pictures


Related Product Guide:

We thinks what clients think, the urgency of urgency to act from the interests of a purchaser position of principle, allowing for greater top quality, decrease processing costs, price ranges are much more reasonable, won the new and aged prospects the support and affirmation for Cheap PriceList for Bell Jar Annealing Furnace Oxygen Probe - Nernst H series heated oxygen probe – Litong, The product will supply to all over the world, such as: Georgia, Estonia, US, Our organization. Situated inside the national civilized cities, the visitors is very easy, unique geographical and economic situations. We pursue a "people-oriented, meticulous manufacturing, brainstorm, construct brilliant" organization. hilosophy. Strict top quality management, fantastic service, reasonable cost in Myanmar is our stand on the premise of competition. If vital, welcome to make contact with us by our web page or telephone consultation, we've been likely to be pleased to serve you.
  • Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
    5 Stars By Judy from United States - 2018.11.04 10:32
    This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
    5 Stars By Elsa from Slovakia - 2017.06.16 18:23

    Related Products