High definition Gas Boiler Oxygen Probe - Nernst R series non-heated high temperature oxygen probe – Litong

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With advanced technologies and facilities, strict good quality manage, reasonable rate, superior assistance and close co-operation with shoppers, we have been devoted to supplying the very best price for our consumers for Maintenance Free Zirconia Probe, Portable O2 Analyser, Trace O2 Analyzer, If needed, welcome to help make speak to with us by our web page or cellular phone consultation, we are going to be delighted to serve you.
High definition Gas Boiler Oxygen Probe - Nernst R series non-heated high temperature oxygen probe – Litong Detail:

Application range

The Nernst R series non-heated high temperature oxygen probe is used to directly measure the oxygen content in various sintering furnaces, mesh bag furnaces, powder metallurgy sintering furnaces, and petrochemical industries. The applicable flue gas temperature is in the range of 700°C~1400°C. The outer protective material is aluminum oxide (corundum).

The probe can be directly connected to Nernst’s oxygen analyzer. It can also be equipped with oxygen analyzers and oxygen sensors produced by other companies. The oxygen probe can measure oxygen in a wide range, from 10-30 to 100% oxygen content.

Specifications and technical parameters

Model: R series non-heated high temperature oxygen probe

Shell material: Aluminum oxide (corundum)

Application flue gas temperature: 700°C~1400°C

Temperature control: Furnace temperature

Thermocouple: Type R

Installation and connection: The probe is equipped with 3 / 4 ″ thread. The user can process the matching flange of the furnace wall according to the attached drawing in the instruction manual.

 Reference gas: The gas pump in the analyzer supplies about 50 ml/min. Use the gas for the instrument and supply the gas through the pressure reducing valve and float flow meter provided by the user. The manufacturer provides the PVC connecting pipe from the float flowmeter to the sensor and the connector at the sensor end with the transmitter.

Gas connection pipe: PVC pipe with an outer diameter of 1/4″ (6.4mm) and an inner diameter of 4 (mm).

Check gas connection: The sensor has an air inlet that can pass check gas. When it is not checked, it is closed by a bulkhead. When calibrating the air, the flow rate is controlled at about 1000 ml per minute. The manufacturer provides 1/8″NPT threaded pipe joints that can be connected to PVC pipes.

Zirconium battery life: 4-6 years of continuous operation. It depends on the flue gas composition and temperature.

Response time: less than 4 seconds

 Filter: Without filter

 Probe protection tube outer diameter: ¢20 (mm)

Probe junction box temperature: <130°C

Probe electrical connection: direct plug socket type or aviation plug socket.

 Weight: 0.45Kg plus 0.35Kg/100mm length.

Calibration: After the initial installation of the system is stable, it needs to be checked once.

Length:

Standard model Explosion-proof model Length
R0500 R0500(EX) 500mm
R0750 R0750(EX) 750mm
R1000 R1000(EX) 1000mm

Product detail pictures:

High definition Gas Boiler Oxygen Probe - Nernst R series non-heated high temperature oxygen probe – Litong detail pictures


Related Product Guide:

Persisting in "High quality, Prompt Delivery, Aggressive Price", we have established long-term cooperation with clientele from both equally overseas and domestically and get new and old clients' higher comments for High definition Gas Boiler Oxygen Probe - Nernst R series non-heated high temperature oxygen probe – Litong, The product will supply to all over the world, such as: Kuala Lumpur, Stuttgart, Juventus, Many goods fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't have to waste time shopping around.
  • We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
    5 Stars By Deborah from Greece - 2017.12.02 14:11
    It's really lucky to find such a professional and responsible manufacturer, the product quality is good and delivery is timely, very nice.
    5 Stars By Nydia from Nicaragua - 2018.11.04 10:32

    Related Products