Hot-selling Rapid Annealing Oxygen Probe - Nernst R series non-heated high temperature oxygen probe – Litong

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We've got a specialist, effectiveness staff to supply high quality service for our shopper. We always follow the tenet of customer-oriented, details-focused for Gas Boiler Oxygen Probe, High Temperature Dew Point Meter Supply, Furnace Oxygen Analyzer, We will empower people by communicating and listening, Setting an example to others and learning from experience.
Hot-selling Rapid Annealing Oxygen Probe - Nernst R series non-heated high temperature oxygen probe – Litong Detail:

Application range

The Nernst R series non-heated high temperature oxygen probe is used to directly measure the oxygen content in various sintering furnaces, mesh bag furnaces, powder metallurgy sintering furnaces, and petrochemical industries. The applicable flue gas temperature is in the range of 700°C~1400°C. The outer protective material is aluminum oxide (corundum).

The probe can be directly connected to Nernst’s oxygen analyzer. It can also be equipped with oxygen analyzers and oxygen sensors produced by other companies. The oxygen probe can measure oxygen in a wide range, from 10-30 to 100% oxygen content.

Specifications and technical parameters

Model: R series non-heated high temperature oxygen probe

Shell material: Aluminum oxide (corundum)

Application flue gas temperature: 700°C~1400°C

Temperature control: Furnace temperature

Thermocouple: Type R

Installation and connection: The probe is equipped with 3 / 4 ″ thread. The user can process the matching flange of the furnace wall according to the attached drawing in the instruction manual.

 Reference gas: The gas pump in the analyzer supplies about 50 ml/min. Use the gas for the instrument and supply the gas through the pressure reducing valve and float flow meter provided by the user. The manufacturer provides the PVC connecting pipe from the float flowmeter to the sensor and the connector at the sensor end with the transmitter.

Gas connection pipe: PVC pipe with an outer diameter of 1/4″ (6.4mm) and an inner diameter of 4 (mm).

Check gas connection: The sensor has an air inlet that can pass check gas. When it is not checked, it is closed by a bulkhead. When calibrating the air, the flow rate is controlled at about 1000 ml per minute. The manufacturer provides 1/8″NPT threaded pipe joints that can be connected to PVC pipes.

Zirconium battery life: 4-6 years of continuous operation. It depends on the flue gas composition and temperature.

Response time: less than 4 seconds

 Filter: Without filter

 Probe protection tube outer diameter: ¢20 (mm)

Probe junction box temperature: <130°C

Probe electrical connection: direct plug socket type or aviation plug socket.

 Weight: 0.45Kg plus 0.35Kg/100mm length.

Calibration: After the initial installation of the system is stable, it needs to be checked once.

Length:

Standard model Explosion-proof model Length
R0500 R0500(EX) 500mm
R0750 R0750(EX) 750mm
R1000 R1000(EX) 1000mm

Product detail pictures:

Hot-selling Rapid Annealing Oxygen Probe - Nernst R series non-heated high temperature oxygen probe – Litong detail pictures


Related Product Guide:

Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for Hot-selling Rapid Annealing Oxygen Probe - Nernst R series non-heated high temperature oxygen probe – Litong, The product will supply to all over the world, such as: venezuela, South Africa, Namibia, Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
  • In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
    5 Stars By Lillian from Mexico - 2017.11.11 11:41
    We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
    5 Stars By Mamie from Chile - 2018.02.08 16:45

    Related Products