-
Nernst HWV water vapour oxygen probe
The probe is used in special steam ovens for food processing, paper industry, textile industry, construction industry, food processing industry and all kinds of industrial production where materials or products need to be dried.
Probe surface material: 316L stainless steel.
-
Nernst R series non-heated high temperature oxygen probe
The probe is used to directly measure the oxygen content in various sintering furnaces, mesh bag furnaces, powder metallurgy sintering furnaces, and petrochemical industries. The applicable flue gas temperature is in the range of 700°C～1400°C. The outer protective material is aluminum oxide (corundum).
-
Nernst L series non-heated medium and high temperature oxygen probe
The probe is used to measure the oxygen content in various sintering furnaces, powder metallurgy sintering furnaces and heat treatment furnaces. The applicable flue gas temperature is in the range of 700°C～1200°C. The outer protective material is superalloy.
-
Nernst HGP series high pressure type oxygen probe
The probe is suitable for high-pressure steam boilers, nuclear steam boilers, nuclear power boilers. Positive pressure variable pressure 0～10 atmospheres, negative pressure variable range -1～0 atmospheres. The applicable temperature is 0℃～900℃
-
Nernst HH series high temperature jet oxygen probe
The probe is equipped with heater and injector, and the applicable temperature is 0℃～1200℃. The probe has a fast response speed, and the response time is less than 100 milliseconds.
Probe surface material: High temperature alloy steel.
-
Nernst H series heated oxygen probe
The probe is equipped with a heater, and the applicable temperature is 0℃～900℃. Generally, standard gas calibration is not required (can be calibrated by ambient air). The probe has high oxygen measurement accuracy, fast response speed, no signal drift and strong corrosion resistance during use.
Probe surface material: 316L stainless steel.
-
Nernst CR series corrosion resistance oxygen probe for waste incineration
The probe is used to directly measure the oxygen content in the flue gas of the waste incinerator,applicable flue gas temperature is in the range of 0℃～900℃, and the outer protection tube material is aluminum oxide (corundum).
Phone
